Power over Ethernet (power input)

Add-on module for all Auvidea carrier Boards with a 22 pin FPC PCIe X1 connector on the bottom side. Adds powering via the Ethernet connection and enables the use of a M12 X-Code connector. 72W peak power is intended for the use with high power systems like the Orin NX. Please reserve a certain margin, to allow peak power draw by the Jetson. Also please account for the power requirements...

Power over Ethernet add-on module (power input)

Add-on module for Auvidea carrier boards (JNX42P) to add powering via the Ethernet connection. 72W peak power is sufficient for high power Orin NX systems. Please reserve a certain margin, to allow peak power draw by the Jetson. Also please account for the power requirements of peripherals like SSD, cameras and more.

• PoE++: 802.3bt Type 4
• Isolated PoE++ module: Murata...

Smallest 5 Port Ethernet switch

• Designed and manufactured in Germany
• Size: 25.5mm x 25.5mm x 6.8mm (LxWxH)
• M2 mount holes: 2.2mm
• Weight: 4.9 grams
• Power input: 5V to 48V
• Ports: 5x JST GH 100Mbit/s
• 100m cable supported
• Based on the Realtec RTL8305NB
• Not Managed, no MCU
• Includes a cable kit
• Customer specific design or NDAA compliant version on request

Accessories

Introducing the R21, an advanced industrial general-purpose
solution designed to enhance the capabilities of the Raspberry
Pi Zero. By seamlessly integrating the Pi Zero and its 40-pin GPIO
header onto the carrier board, the R21 provides a robust
foundation for expanded functionality.

Unlocking new possibilities, the R21 features a PCIe-based M.2
Key M slot, offering reliable and high-speed solid-state storage...

Power over Ethernet (power output)

Add-on module for Auvidea carrier boards (JNX30M, JNX42 and more) to deliver PoE power to network cameras. The P18 integrates a pushup power supply, to boost the 12V or 24V input to 48V for PoE. This eases the integration of PoE into 12V and 24V systems.

• PoE+ power control: manage PoE connection, check power draw, enable/disable power
• PoE control: TPS23861 (control and status via I2C)...

Power over Ethernet add-on module (power input)

Add-on module for Auvidea carrier boards (JNX30M, JNX42 and more) to add powering via the Ethernet connection. 25W peak power is sufficient for mid range Jetson systems (Orin Nano). Please reserve a certain margin, to allow peak power draw by the Jetson. Also please account for the power requirements of peripherals like SSD, cameras and more. For high power Orin NX systems...

This Ethernet cable is designed for: JNX45 and JNX46 and requires RJ45 to IX Ethernet cable.