This Ethernet cable is designed for: JNX45 and JNX46 and requires RJ45 to IX Ethernet cable.

These expansion modules grant you the possibility to use different M.2 key B and key E cards.

Features:
– USB 2.0 to flash the Jetson
– Jetson debug UART console
– MCU console
– optional: limited power supply to Jetson (just for flashing only) – 350mA max. (limited by Ethernet cable)

Size: 18mm x 79mm

Designed for: JNX45 and JNX46 (requires RJ45 to IX Ethernet cable – 1.5m max)

Please order RJ45 to IX Ethernet cable for connecting Service Port Adapter to the service port...

Size: 18mm x 16mm
2x 2.2mm mounting holes
Power supply: 3.3V or 5V
2 outputs
2 inputs
Usage: UART or GPIO level shifter

Ideal for JNX30, JNX30M, JNX42, etc:
– UART0 port (J25)
– I2S port (J26) – please check pin direction
– etc

If there is no stock, lead times may vary. Please contact our sales team.

This add-on module is a 4 port GbE switch adapter board and will be connected via PCIe X1.
It has 5 RGB LEDs and can be set up as desired.

This board is available with RJ45 sockets (P140-R) or Xcode sockets (P140-M)

At full power, the Power Inductor should be cooled.

P140 is compatible to the following carrier boards:

JNX30
JNX30M
JNX42
X221D
X230D

If the carrier board has no PCIex1 interface, P140 can be connected to other...

If there is no stock, lead times may vary. Please contact our sales team.

These boards are plugged in under the X221-AI and X230-AI

4x CSI-2 with 4 lanes each
1x M.2 NVME 2280
1x M.2 Key E for Wifi
SIM Card slot.

The M230 is available in 2 versions:

The M230-1S only has components on the top side. The bottom is flat. This allows it to be mounted in the compact Nano aluminum enclosure.

The M230-2S is fully populated on both sides of the board.