This compact adapter board enables conversion from a 20-pin micro coax connector to a standard 4-pin JST-GH interface, making it ideal for integration of our cameras and similar systems.

Please note that the cameras and cables must be ordered separately.

Auvidea has upgraded the thermal cameras UV640-9 and UV256-4 to make them more rugged for industrial and drone applications. The standard JST 4 pin connector is replaced by well shielded connectors to that the cameras are less sensitive in EMI challenging applications.

The Auvidea CA6x adaptors replace the standard interface board and thereby become an integral part of the camera.

In our drone reference design we...

Features:
– USB 2.0 to flash the Jetson
– Jetson debug UART console
– MCU console
– optional: limited power supply to Jetson (just for flashing only) – 350mA max. (limited by Ethernet cable)

Size: 18mm x 79mm

Designed for: JNX45 and JNX46 (requires RJ45 to IX Ethernet cable – 1.5m max)

Please order RJ45 to IX Ethernet cable for connecting Service Port Adapter to the service port...

Size: 18mm x 16mm
2x 2.2mm mounting holes
Power supply: 3.3V or 5V
2 outputs
2 inputs
Usage: UART or GPIO level shifter

Ideal for JNX30, JNX30M, JNX42, etc:
– UART0 port (J25)
– I2S port (J26) – please check pin direction
– etc

Please note that some descriptions of pinouts on the bottom side are wrong. The correct pinouts are as follows (you can also use picture 3 as guidance):

UART 3.3V:

• GND
• CTSin...

Tiny adapter to interface Framos CSI-2 camera modules with Auvidea carrier boards (with voltage and interface conversion)

HDMI to CSI-2 bridge (ships with 50mm 22 pin FFC cable (0.5mm pitch) and a cable set for the 10 pin connector) (38127-2) (only for Raspberry Pi Zero)