Auvidea has upgraded the thermal cameras UV640-9 and UV256-4 to make them more rugged for industrial and drone applications. The standard JST 4 pin connector is replaced by well shielded connectors to that the cameras are less sensitive in EMI challenging applications.

The Auvidea CA6x adaptors replace the standard interface board and thereby become an integral part of the camera.

In our drone reference design we...

The JNX120X is our smallest Jetson carrier board with an integrated PAB (Pixhawk Auto Pilot Bus) slot. With only 121mm x 50mm.

The JNX120X is a modern drone carrier board which is CAN centric and targeted for small to large drones.

• super mode support for Orin Nano and NX
• M.2 key M 2230 NVME SSD
• M.2 key E 2230 wifi (USB 2.0 and PCIe x1)
• M.2 key B (LTE and 5G)
• I2C
• CAN (optional internal termination)
• MCU (optional watchdog)
• USB...

Cooling Kit for NVIDIA Jetson Orin NX/Nano and Jetson Xavier NX

Prevent potential overheating and ensure optimal performance of your Jetson Xavier NX module with our standard or high temperature copper cooling kit.

Securely mount the heatsink onto your module for superior cooling and thermal management.

If there is no stock, lead times may vary....

8S Balancer and Charger

The D210 combines the 5 main functions needed for drone or robotic battery based systems on the smallest form factor possible. Despite its tiny size, it supports very large currents for high performance systems.

1. Balancer

• precise cell balancing (10mV)
• 2 options: 6S and 8S (other configurations on request)
• low standby power consumption: 1uA
• 9 pin connector (J4): JST XH (2.5mm pitch)
• 2 temperature...

This board is based around the capabilities of the PAB (Pixhawk Autopilot Bus Standard) implemented in our JNX110 carrier board, to enable easy and space efficient installation of flight controllers in different use cases.

The power in supports reverse voltage protection and an inrush current limitation to minimize mishaps during setup.

All standard PX4 autopilot functions are supported,...

    The JNX120 carrier board is available in two variants: The JNX120S is our smallest Jetson carrier board to date. With only 24.7mm x 75mm (PCB weight (w/o compute module, M.2 cards): approx. 14 grams) its size is less than halve the size of a NVIDIA Jetson module and includes the following features:

• super mode support for Orin Nano and NX
• M.2 key M NVME SSD
• M.2 2230 key E wifi (USB 2.0 and PCIe x1)
• I2C
• CAN (optional internal...

This carrier board is designed to be a drone platform powered by the NVIDIA Jetson Orin Nano or NX, offering a robust foundation for onboard AI processing and autonomy.

The JNX110 carrier board, specifically designed to interface seamlessly with both the Jetson module and the Pixhawk flight controller (Pixhawk Autopilot Bus standard connector) allows for easy integration for a compact, high-performance architecture...

The X242 is a very high performance and extendable carrier board for the Jetson T5000 (Thor).

Up to 4 monitors can be directly connected (1x HDMI, 3x USB-C).

Connection of multiple Jetson T5000 systems via PCIe x8 or 10GbE is possible. The X242 features an industrial strength design and is commercially deployable in any volume.

• PCIe Gen 5 support: Up to 32 Gbit/s per lane
• 2x native low-power 10GbE ports (based...