PCIe x1 extension module for JNX42 or JNX45 carrier board.

The W230 is a tiny M.2 add-on module to provide very precise GNSS (GPS) localisation. It is based on the u-blox ZED-F9 modules. The W230 is unique as it does not only provide the USB 2.0 connection to the GNSS module. It also provides 2 UART connections so that all features of the GNSS module can be utilised.

If there is no stock, lead times may vary. Please ask the sales team: [email protected].

Developer Kit Content (P3766)

Jetson Orin Nano 8GB module with heat sink and reference carrier board
DC Power Supply
802.11ac/abgn wireless network interface controller
Quick Start Guide

Jetson Orin Nano 8GB Module

NVIDIA Ampere architecture with 1024 NVIDIA CUDA cores with 32 tensor cores
6-core Arm Cortex-A78AE v8.2 64-bit CPU
8GB 128-bit LPDDR5 68 GB/s
Supports for external NVMe

Reference carrier board

2x MIPI...

In stock

The NVIDIA Jetson Orin Nano 8GB module features a 1024-core NVIDIA Ampere GPU, 32 tensor cores, and a 6-core Arm Cortex-A78AE CPU. With 8GB of LPDDR5 memory, it delivers up to 40 TOPS of AI performance in a small form factor, configurable between 7W and 15W.

Offering up to 30X the performance of the Jetson TX2 NX, it extends the reach of entry-level Edge AI applications. The module is pin-compatible with Jetson...

This Ethernet cable is designed for: JNX45 and JNX46 and requires RJ45 to IX Ethernet cable.

This compact carrier board has been developed for cost sensitive embedded headless applications. Cost has been reduced by eliminating interfaces like monitor output. The target market is security and surveillance applications.

We also sell compute modules for carrier boards. Please contact the sales team.

If there is no stock, delivery times may vary. For more information please contact the sales team: [email protected]...

This compact carrier board has been developed for cost sensitive embedded headless applications. Cost has been reduced by eliminating interfaces like monitor output. The target market is security and surveillance applications. GPIO inputs and outputs support the interfacing to alarm systems.

JNX83 differs in size compared to the JNX84.
It is designed for Jetson Nano and Xavier NX.

Designed for 4 M.2 cards, 2 on top and 2 on the bottom.

1. M.2 key B 2242/3042 card

• LTE or 5G cards
• dual nano SIM
• eSIM optional

2. designed for M.2 key E 2230/2242 cards.
3. designed for M.2 key E 2242 cards.
4. designed for M.2 key E 2230 cards.

• Wifi (note: USB 2.0 only)
• GNSS
• GNSS RTK
• LoraWAN
• 4 mounting holes 2.2mm
• Size: 53mm x 60.7mm
• USB: USB-C with 5V and USB 2.0

M.2 cards are mounted with M3 screw. It has an integrated...