This board is based around the capabilities of the PAB (Pixhawk Autopilot Bus Standard) implemented in our JNX110 carrier board, to enable easy and space efficient installation of flight controllers in different use cases.

The power in supports reverse voltage protection and an inrush current limitation to minimize mishaps during setup.

All standard PX4 autopilot functions are supported,...

    The JNX120 carrier board is available in two variants: The JNX120S is our smallest Jetson carrier board to date. With only 24.7mm x 75mm (PCB weight (w/o compute module, M.2 cards): approx. 14 grams) its size is less than halve the size of a NVIDIA Jetson module and includes the following features:

• super mode support for Orin Nano and NX
• M.2 key M NVME SSD
• M.2 2230 key E wifi (USB 2.0 and PCIe x1)
• I2C
• CAN (optional internal...

This carrier board is designed to be a drone platform powered by the NVIDIA Jetson Orin Nano or NX, offering a robust foundation for onboard AI processing and autonomy.

The JNX110 carrier board, specifically designed to interface seamlessly with both the Jetson module and the Pixhawk flight controller (Pixhawk Autopilot Bus standard connector) allows for easy integration for a compact, high-performance architecture...

The X242 is a very high performance and extendable carrier board for the Jetson T5000 (Thor).

Up to 4 monitors can be directly connected (1x HDMI, 3x USB-C).

Connection of multiple Jetson T5000 systems via PCIe x8 or 10GbE is possible. The X242 features an industrial strength design and is commercially deployable in any volume.

• PCIe Gen 5 support: Up to 32 Gbit/s per lane
• 2x native low-power 10GbE ports (based...

Mini flashing USB- stick

This USB stick is suitable for the programming of our standard MCUs (STM8/STM32).  Enabling you to flash your systems on your own.

10 GigaBit Ethernet – The future of high-speed networking

This tiny M.2 key E (2230/2242) add-on card is designed to seamlessly elevate any computer with a M.2 with 10G Ethernet. 

• Supports NVIDIA Jetson Orin NX/AGX and more
• Based on Realtek RTL8127
• Low power: < 1.5W
• M.2 key E card (2230/2242)
• PicoBlade 10 pin connector (for RJ45 or M12 Xcode)
• PoE support optional (4 pin JST-GH)
• Size: 22mm x 30/42mm
• SW drivers:...

Dual 10G Ethernet

The X232 is a high performance and extendable carrier board for the NVIDIA Jetson AGX Orin.

This board features the new RTL8127 chip, offering a compact 10G solution with high performance and low power requirements.

There is also the opportunity to add a flexible extension board. An example is the M280, which features 4 M.2 Key M slots (4x PCIe x4).

Connection of multiple Jetson Orin systems via PCIe...

World’s smallest Hailo-15H AI accelerator for camera integration

Introducing our ultra compact (only 25.5mm x 25.5mm) and highly modular AI accelerator camera compute stack, built upon the powerful Hailo 15H SOC. Unlock the full potential of AI driven imaging with our versatile and efficient AI accelerator.

Designed for seamless adaptability, this product features a modular board architecture that allows...