Ready-to-Use Embedded Systems

Save development time and receive a fully assembled embedded computing platform, ready for integration into your project. Our assembly service combines our carrier boards, adapter boards, NVIDIA® Jetson™ modules, SSD storage, and additional hardware into a professionally built system that is tested before shipment.

What’s Included

• Installation of your selected carrier...

The JNX120X is our smallest Jetson carrier board with an integrated PAB (Pixhawk Auto Pilot Bus) slot. With only 121mm x 50mm.

The JNX120X is a modern drone carrier board which is CAN centric and targeted for small to large drones.

• super mode support for Orin Nano and NX
• M.2 key M 2230 NVME SSD
• M.2 key E 2230 wifi (USB 2.0 and PCIe x1)
• M.2 key B (LTE and 5G)
• I2C
• CAN (optional internal termination)
• MCU (optional watchdog)
• USB...

Cooling Kit for NVIDIA Jetson Orin NX/Nano

Prevent potential overheating and ensure optimal performance of your Jetson Orin NX/Nano module with our standard or high temperature copper cooling kit.

Securely mount the heatsink onto your module for superior cooling and thermal management.

If there is no stock, lead times may vary. For more information, please...

The JNX120 carrier board is available in two variants: The JNX120S is our smallest Jetson carrier board to date. With only 24.7mm x 75mm (PCB weight (w/o compute module, M.2 cards): approx. 14 grams) its size is less than halve the size of a NVIDIA Jetson module and includes the following features:

• super mode support for Orin Nano and NX
• M.2 key M NVME SSD
• M.2 2230 key E wifi (USB 2.0 and PCIe x1)
• I2C
• CAN (optional internal termination)...

This carrier board is designed to be a drone platform powered by the NVIDIA Jetson Orin Nano or NX, offering a robust foundation for onboard AI processing and autonomy.

The JNX110 carrier board, specifically designed to interface seamlessly with both the Jetson module and the Pixhawk flight controller (Pixhawk Autopilot Bus standard connector) allows for easy integration for a compact, high-performance architecture...

10 GigaBit Ethernet – The future of high-speed networking

This tiny M.2 key E (2230/2242) add-on card is designed to seamlessly elevate any computer with a M.2 with 10G Ethernet. 

• Supports NVIDIA Jetson Orin NX/AGX and more
• Based on Realtek RTL8127
• Low power: < 1.5W
• M.2 key E card (2230/2242)
• PicoBlade 10 pin connector (for RJ45 or M12 Xcode)
• PoE support optional (4 pin JST-GH)
• Size: 22mm x 30/42mm
• SW drivers: Linux,...

5 GigaBit Ethernet – The future of high-speed networking

This tiny M.2 key E (2230/2242) add-on card is designed to seamlessly elevate your cameras performance and to enable the use of 5 GigE Vision cameras.

• Supports NVIDIA Jetson Orin NX/AGX and more
• Based on Realtek RTL8126
• Low power: < 1.5W
• M.2 key E card (2230/2242)
• PicoBlade 10 pin connector (for RJ45 or M12 Xcode)
• PoE support optional (4 pin JST-GH)
• Size:...

The JNX40S and the JNX41S models are designed to support the high power mode of the Orin Nano/NX Super. This enhanced mode is available for all Jetson Orin Nano/NX modules with the implementation of the JetPack 6.2.

The primary distinction between the JNX40S and JNX41S lies in their CSI-2 connectors. The JNX41S features 2x (4 lanes), opening up the space for the use of additional GPIOs (2x native or 7x via...