8S Balancer and Charger

The D210 combines the 5 main functions needed for drone or robotic battery based systems on the smallest for factor possible. Despite its tiny size, it supports very large currents for high performance systems.

1. Balancer

• precise cell balancing (10mV)
• 2 options: 6S and 8S (other configurations on request)
• low standby power consumption: 1uA
• 9 pin connector (J4): JST XH (2.5mm pitch)
• 2 temperature...

10 GigaBit Ethernet – The future of high-speed networking

This tiny M.2 key E (2230/2242) add-on card is designed to seamlessly elevate any computer with a M.2 with 10G Ethernet. 

• Supports NVIDIA Jetson Orin NX/AGX and more
• Based on Realtek RTL8127
• Low power: < 1.5W
• M.2 key E card (2230/2242)
• PicoBlade 10 pin connector (for RJ45 or M12 Xcode)
• PoE support optional (4 pin JST-GH)
• Size: 22mm x 30/42mm
• SW drivers:...

5 GigaBit Ethernet – The future of high-speed networking

This tiny M.2 key E (2230/2242) add-on card is designed to seamlessly elevate your cameras performance and to enable the use of 5 GigE Vision cameras.

• Supports NVIDIA Jetson Orin NX/AGX and more
• Based on Realtek RTL8126
• Low power: < 1.5W
• M.2 key E card (2230/2242)
• PicoBlade 10 pin connector (for RJ45 or M12 Xcode)
• PoE support optional (4 pin JST-GH)
• Size: 22mm x...

Expansion module for our carrier boards

This addon module lets you expand the use of our carrier boards and enables you to connect to audio devices.

• USB audio device plus audio amplifier
• Compatible with JNX8X
• Line out (3.5mm stereo jack)
• Speaker out (4pin Harting connector)
• 2x 15W audio amplifier
• M.2 key E slot (2230/2242) USB + PCIe
• Optional Raspberry Pi Pico
• Model number: 38638-3
• Used in our AI driven Auvideus 1000...

Expansion for the X23x carrier boards

This addon module lets you expand the use of our X23x carrier boards for the AGX Orin by enabling you to use the following:

• 4x 4-lane M.2 Key M (PCIe x4)
• 4x 4-lane OCuLink (PCIe x4)
• 2x 120pin PCIe x8 (connector to carrier)

Status: In development. Please contact our sales team.

Expansion for the X230D

This addon module lets you expand the use of our X230D carrier board for the AGX Orin by enabling you to use swappable M.2 SSDs.

• 2x 22pin PCIe x1 (device side)
• JST GH 4pin Power connector (12V)
• Due to software limitations this solution is not hot swappable

Expansion for the M208F

This addon module lets you expand the use of our M208F or X230D by enabling you to use swappable M.2 SSDs.

• 2x 40pin PCIe x4 (device side)
• JST GH 4pin Power connector (12V)
• Due to software limitations this solution is not hot swappable

Expansion for the X231 carrier boards

This addon module lets you expand the use of our X231 carrier boards for the AGX Orin by enabling you to use the following:

• 3x M.2 Key E (USB2.0) 2242/2230 (top side), 2242 (bottom side)
  • GNSS (GPS), GNSS (GPS) RTK, USB based Wifi
  • PCIe based Wifi cards are not supported
• 1x M.2 Key B (USB2.0) 3042 (bottom side) with dual nano SIM (eSIM optional)
  • LTE
• 4x 4-lane CSI-2 ports (22pin FPC)
• 2x PCIe...