Description

Each stack includes:

• M12 lens
• M12 lens mount (29595)
• C102 camera board IMX678 (70640)
• HC5 camera adapter board (orientation sideways) (70645)
• Aluminum heatspreader for the H101 (70608)
• H101 Hailo 15H compute board (quad-core ARM A53 @ 1.3GHz and 4GB LPDDR4 @ 4.2GT/s) (70646)
• HM10 memory board (QSPI and micro SD card) (70631)
• Micro SD card with bootable Yocto Linux (32GB)
• HC10 network interface adapter with PoE (12W, 802.3at type 1) (70632)
• Aluminum heatspreader for HC10 (29594)
• Ethernet cable 150mm 10pin picoblade 1:1 (42458-150)
• BE323 RJ45 Ethernet adapter (70927)
• Mounting kit and aluminum mounting plate

Ready to boot – start developing right away!

Features:

• High FPS for faster, accurate object detection per frame
• Optimal AI performance at low power and cost
• AI powered enhancements for noise reduction, digital zoom, stabilization, and correction
• Premium 4k60 quality with HDR and noise reduction
• Leading DSP vision processing and video encoding (H.264/H.265)
• ISP (Image Signal Processor): advanced noise reduction (2DNR, 3DNR, Chroma NR), digital zoom, flip, rotate, digital image stabilization, lens distortion correction
• Ideal as preprocessor for NVIDIA Jetson systems
• Fully hardware compatible to the Hailo 15 SBC board – uses the same camera sensor (IMX678) with same GPIO, I2C bus and CSI-2 bus

Please note:

• For support in regard of the Hailo software, please contact the Hailo support directly.
• The SBC SW image works. However it needs to be compiled with a customer certificate, as we use the production silicon of the Hailo 15 chip. Our images use the Auvidea certificate.
• We include a 32GB micro SD card with Yocto Linux image. It is fully preconfigured. We also supply the Gstreamer pipeline to get you going right away. We recommend to make a backup of the SD card.
• The camera stack features 4 M3 mount holes, to attach it to heat dissipating structure. At full load we expect a thermal power of 5 to 6W (please install the mounting plate or other means for sufficient heat dissipation).
• The Hailo 15 is designed for camera integration with uncompressed video feeds (MIPI CSI-2, FPD-Link III, GMSL2, A-PHY, USB3-Vision or GigE-Vision).
• The Hailo 15H does not integrate a video decoder and should not be used with compressed video streams from USB cameras or network IP cameras.
• There is no power supply included. PoE will be used for power supply.

Technical Specifications:

• Hailo 15H with an AI performance of 20 TOPS
• Application processor: Quad-Core ARM A53 with up to 1.3 GHz (12kDMIPs)
• Memory: 4GB (LPDDR4 32bit @ 4266 MT/s)
• QSPI: 32MB boot loader (upgradable with UART debug console)
• Flash memory: Micro SD 32GB (up to 1TB possible) – please use Sandisk Ultra cards
• Board spacing: 3.0mm, 4.0mm (heat spreader)
• Board size: 25.5mm x 25.5mm (1 inch by 1 inch)
• Designed and manufactured in Germany (inhouse SMT line)

Custom versions with different Hailo 15 (L, M) variations and 4 or 8GB LPDDR4 memory are available on request. These custom versions are non stocked and require special builds. Minimum order quantities may apply.

HC11 network interface adapter:
This alternative network adapter (w/o PoE) supports the following interfaces:

• Gbit Ethernet (same as HC10) (10 pin picoblade)
• DC input (12V 1A) (4 pin picoblade)
• USB 2.0 (4 pin JST-GH) (not supported today)
• I/O port with UART debug console and I2C (6 pin JST-GH) (both 3.3V)

Available addons:

• CA20: Leopard camera adapter (IPEX)
• HM11: eMMC based memory board (32 and 64GB)
• HC3: FPC camera adapter (22pin 0.5mm pitch)
• HC11: Ethernet (w/o PoE), debug UART, I2C, DC power

Future addons:

• C101: IMX662 camera sensor (2MP rolling shutter Starvis 2)
• C201: IMX900 camera sensor (3.2MP global shutter Pregius)
  Protoypes of these sensors are already available and they are supported by the NVIDIA Jetson
• Driver development for the Hailo 15 is planned
• HC6: camera adapter for vertical orientation