Expansion for the X230D

This addon module lets you expand the use of our X230D carrier board for the AGX Orin by enabling you to use swappable M.2 SSDs.

• 2x 22pin PCIe x1 (device side)
• JST GH 4pin Power connector (12V)
• Due to software limitations this solution is not hot swappable

Expansion for the M208F

This addon module lets you expand the use of our M208F or X230D by enabling you to use swappable M.2 SSDs.

• 2x 40pin PCIe x4 (device side)
• JST GH 4pin Power connector (12V)
• Due to software limitations this solution is not hot swappable

Expansion for the X231 carrier boards

This addon module lets you expand the use of our X231 carrier boards for the AGX Orin by enabling you to use the following:

• 3x M.2 Key E (USB2.0) 2242/2230 (top side), 2242 (bottom side)
  • GNSS (GPS), GNSS (GPS) RTK, USB based Wifi
  • PCIe based Wifi cards are not supported
• 1x M.2 Key B (USB2.0) 3042 (bottom side) with dual nano SIM (eSIM optional)
  • LTE
• 4x 4-lane CSI-2 ports (22pin FPC)
• 2x PCIe...

Expansion for the X23x carrier boards

This addon module lets you expand the use of our X23x carrier boards for the AGX Orin by enabling you to use the following:

• 3x M.2 Key E (USB2.0) 2242/2230 (top side), 2242 (bottom side)
  • GNSS (GPS), GNSS (GPS) RTK, USB based Wifi
  • PCIe based Wifi cards are not supported
• 1x M.2 Key B (USB2.0) 3042 (bottom side) with dual nano SIM (eSIM optional)
  • LTE
• 4x 4-lane CSI-2 ports (22pin FPC)
• 2x OCuLink...

Expansion for the X23x carrier boards 

This addon module lets you expand the use of our X23x carrier boards for the AGX Orin by enabling you to use the following:

• 3x M.2 Key E (USB2.0) 2242/2230 (top side), 2242 (bottom side)
  • GNSS (GPS), GNSS (GPS) RTK, USB based Wifi
  • PCIe based Wifi cards are not supported
• 1x M.2 Key B (USB2.0) 3042 (bottom side) with dual nano SIM (eSIM optional)
  • LTE, GNSS (GPS), GNSS (GPS) RTK
• 4x 4-lane CSI-2...

This module provides basic power protection for the modular carrier boards.

Add-on module for Auvidea carrier boards (JNX30M, JNX42, JNX42P).

• Common mode filter (improved EMI)
• DC power in: 19V max (4A nominal)
  • reverse voltage protection: highly efficient with MOSFET
  • 18V TRS diode for protection against over voltage spikes (>20V)
  • The voltage limit of the carrier board still applies, this board does not reduce...

Power over Ethernet (power input)

Add-on module for all Auvidea carrier Boards with a 22 pin FPC PCIe X1 connector on the bottom side. Adds powering via the Ethernet connection and enables the use of a M12 X-Code connector.

72W peak power is intended for the use with high power systems like the Orin NX. Please reserve a certain margin, to allow peak power draw by the Jetson. Also please account for the power requirements...

Power over Ethernet add-on module (power input)

Add-on module for Auvidea carrier boards (only JNX42P, other boards are in development) to add powering via the Ethernet connection. 72W peak power is sufficient for high power Orin NX systems. Please reserve a certain margin, to allow peak power draw by the Jetson. Also please account for the power requirements of peripherals like SSD, cameras and more.

• PoE++: 802.3bt...