In stock

The NVIDIA Jetson Orin Nano 8GB module features a 1024-core NVIDIA Ampere GPU, 32 tensor cores, and a 6-core Arm Cortex-A78AE CPU. With 8GB of LPDDR5 memory, it delivers up to 40 TOPS of AI performance in a small form factor, configurable between 7W and 15W.

Offering up to 30X the performance of the Jetson TX2 NX, it extends the reach of entry-level Edge AI applications. The module is pin-compatible with Jetson...

This Ethernet cable is designed for: JNX45 and JNX46 and requires RJ45 to IX Ethernet cable.

This compact carrier board has been developed for cost sensitive embedded headless applications. Cost has been reduced by eliminating interfaces like monitor output. The target market is security and surveillance applications.

We also sell compute modules for carrier boards. Please contact the sales team.

If there is no stock, delivery times may vary. For more information please contact our sales team.

Designed for 4 M.2 cards, 2 on top and 2 on the bottom.

• M.2 key B 2242/3042 card
  • LTE or 5G cards
  • dual nano SIM
  • eSIM optional
• designed for M.2 key E 2230/2242 cards.
• designed for M.2 key E 2242 cards.
• designed for M.2 key E 2230 cards.
• Wifi (note: USB 2.0 only)
• GNSS
• GNSS RTK
• LoraWAN
• 4 mounting holes 2.2mm
• Size: 53mm x 60.7mm
• USB: USB-C with 5V and USB 2.0

M.2 cards are mounted with M3 screw. It has an integrated 4 port USB 2.0 hub (only...

The top side is designed for M.2 key B 2242 cards. 3042 are fine too, but are wider than the U101B.

• LTE or 5G cards
• dual nano SIM
• eSIM optional

The bottom side is designed for M.2 key E 2230/2242 cards.

• Wifi (note: USB 2.0 only)
• GNSS
• GNSS RTK
• LoraWAN
• M.2 cards are mounted with M3 screw.
• 4 mounting holes 2.2mm
• Size: 30mm x 60.7mm
• USB: USB-C with 5V and USB 2.0

It has an integrated 4 port USB 2.0 hub (only 2 ports used).

It has a Flat bottom....

These expansion modules grant you the possibility to use different M.2 key B and key E cards.

Features:
– USB 2.0 to flash the Jetson
– Jetson debug UART console
– MCU console
– optional: limited power supply to Jetson (just for flashing only) – 350mA max. (limited by Ethernet cable)

Size: 18mm x 79mm

Designed for: JNX45 and JNX46 (requires RJ45 to IX Ethernet cable – 1.5m max)

Please order RJ45 to IX Ethernet cable for connecting Service Port Adapter to the service port...

Size: 18mm x 16mm
2x 2.2mm mounting holes
Power supply: 3.3V or 5V
2 outputs
2 inputs
Usage: UART or GPIO level shifter

Ideal for JNX30, JNX30M, JNX42, etc:
– UART0 port (J25)
– I2S port (J26) – please check pin direction
– etc

Please note that some descriptions of pinouts on the bottom side are wrong. The correct pinouts are as follows (you can also use picture 3 as guidance):

UART 3.3V:

• GND
• CTSin...