The top side is designed for M.2 key B 2242 cards. 3042 are fine too, but are wider than the U101B.

• LTE or 5G cards
• dual nano SIM
• eSIM optional

The bottom side is designed for M.2 key E 2230/2242 cards.

• Wifi (note: USB 2.0 only)
• GNSS
• GNSS RTK
• LoraWAN
• M.2 cards are mounted with M3 screw.
• 4 mounting holes 2.2mm
• Size: 30mm x 60.7mm
• USB: USB-C with 5V and USB 2.0

It has an integrated 4 port USB 2.0 hub (only 2 ports used).

It has a Flat bottom....

These expansion modules grant you the possibility to use different M.2 key B and key E cards.

Features:
– USB 2.0 to flash the Jetson
– Jetson debug UART console
– MCU console
– optional: limited power supply to Jetson (just for flashing only) – 350mA max. (limited by Ethernet cable)

Size: 18mm x 79mm

Designed for: JNX45 and JNX46 (requires RJ45 to IX Ethernet cable – 1.5m max)

Please order RJ45 to IX Ethernet cable for connecting Service Port Adapter to the service port...

Size: 18mm x 16mm
2x 2.2mm mounting holes
Power supply: 3.3V or 5V
2 outputs
2 inputs
Usage: UART or GPIO level shifter

Ideal for JNX30, JNX30M, JNX42, etc:
– UART0 port (J25)
– I2S port (J26) – please check pin direction
– etc

Please note that some descriptions of pinouts on the bottom side are wrong. The correct pinouts are as follows (you can also use picture 3 as guidance):

UART 3.3V:

• GND
• CTSin...

In stock

The Jetson Orin NX 8GB module includes a 1024-core NVIDIA Ampere GPU, 32 tensor cores, NVDLA v2.0, a 6-core Arm® Cortex®-A78AE CPU, and 8GB LPDDR5 RAM. It offers up to 70 TOPS of AI performance with configurable power from 10W to 20W, surpassing the performance of Jetson AGX Xavier and Xavier NX.

Ideal for compact, low-power devices like drones, it supports multiple AI applications via the NVIDIA Ampere architecture,...

In stock

The NVIDIA Jetson Orin Nano 4GB module delivers up to 20 TOPS of AI performance in the smallest Jetson form-factor, with power configurable from 5W to 10W.

This gives you up to 40X the performance of NVIDIA Jetson Nano and sets the new baseline for entry-level Edge AI.

This system-on-module is pin-compatible with Jetson Orin NX, and supports multiple concurrent AI application pipelines with high-speed IO and...

This add-on module is a 4 port GbE switch adapter board and will be connected via PCIe X1.
It has 5 RGB LEDs and can be set up as desired.

This board is available with RJ45 sockets (P140-R) or Xcode sockets (P140-M)

At full power, the Power Inductor should be cooled.

P140 is compatible to the following carrier boards:

JNX30
JNX30M
JNX42
X221D
X230D

The X410-AI and X410-LC are specially designed for system integrators, offering enhanced flexibility with their low-profile connectors and a variety of adapter options.

These features allow you to easily position the ports exactly where you need them within your enclosure or system.

The X410-AI comes equipped with the following:

• 2x CSI interface
• Micro SD slot
• CAM LED
• Battery holder
• GbE via 12-pin FPC
• 2x UART interface...