This mounting kit includes:

• 4x (41013)

This mounting kit includes:

• 4x M2x4 Philips (41250)

AGX Xavier mounting kit for the AGX Xavier production module and carrier boards like the X220 or similar.

The screws are inserted from the top of the Xavier module.

The 2 (2mm and 2.5mm) spacers are inserted between the Xavier and the carrier board to yield a gap of 4.5mm.

The nut is attached below the carrier board. The X220 requires 4.5mm spacing.

Other carrier boards may be fine with 4mm spacing.

Cable kit for X220 (51113), X221 and X230:

• 12x wire with single 2.54mm female header (pin)
• 2x 4 pin JST GH compatible receptacle housings
• 2x 6 pin JST GH compatible receptacle housings
• 2x 8 pin JST GH compatible receptacle housings

For self assembly. Just insert wire with pre-crimped terminal into housing. No soldering or crimping required.

Pre-crimped wire for picoblade compatible receptacle housings (42400 to 42410) with 1.25mm pitch (Molex: 0510210400 and similar).

Wire may easily be inserted into housing. No crimping or soldering required.

Wire in different colors available.

These wires are included in the wire kits for the Jetson carrier boards.

Wire length: 100 mm with 2.54mm female header pin
Wire type: AWG28

with 4 pin PicoBlade connector.

This cable kit includes:

• 4x A1251-H04 picoBlade Stecker 4 polig (42402)
• 4x A1251-TP2-300-tin plated red 300mm, with solder pin (42601)
• 2x A1251-TP2-300-tin plated black 300mm, with solder pin (42600)