The J143 is available in 2 configurations:

J143-48:

– no PoE PSE: power in: 12V to 48V
– PoE PSE: power in must be 48V
– power in directly powers PoE PSE

This cable kit includes:

• 1x A1251-H09, PicoBlade Stecker 9 pol (42407)
• 1x A1251-H06, PicoBlade Stecker 6 pol (42404)
• 1x FFC Kabel 15-1.0-50, L=50mm, 15 polig, 1.0 P (42100)
• 1x FFC Kabel 22-0.5-50, L=50mm, 22 polig, 0.5 P (42101)
• 4x A1251-TP2 both side black, 75mm long (42510)
• 4x A1251-TP2 both side red, 75mm long (42511)
• 4x A1251-TP2 both side orange, 75mm long (42512)
• 4x A1251-TP2 both side green, 75mm long (42513)

This cable kit for the M110 includes:

• 4 x M2,5×5-6 outside (41013)
• 2 x A2541-H01-100-A1251-TP blue, 100mm, with a female header pin (42585)
• 2 x A2541-H01-100-A1251-TP yellow, 100mm, with a female header pin (42586)
• 5 x A1251-H04, PicoBlade Stecker 4 pol (42402)
• 2 x A1251-H06, PicoBlade Stecker 6 pol (42404)
• 3 x A2541-H01-100-A1251-TP red, 100mm, with a female header pin (42581)
• 5 x A2541-H01-100-A1251-TP black,...

This cable kit includes:

• 4x 4pol GH, 42242
• 4x 6pol GH, 42244
• 4x 8pol GH, 42246
• 2x 10pol GH, 42248
• 4x JST-GH to male header pin black (200mm), 42771
• 4x JST-GH to male header pin red (200mm), 42772
• 4x JST-GH to male header pin blue (200mm), 42773
• 4x JST-GH to male header pin yellow (200mm), 42774
• 4x JST-GH to female header pin black (100mm), 42780
• 4x JST-GH to female header pin red (100mm), 42781
• 4x JST-GH to female header pin orange...

Cooling Kit for NVIDIA Jetson Nano

Ensure your Jetson Nano module operates efficiently and stays cool with our complete cooling kit. This kit helps prevent potential overheating and includes:

• Heatsink
• Leaf Spring
• 4 Screws

Securely mount the heatsink onto your module for optimal cooling performance and enhanced thermal management.

If there is no stock, lead times may vary. For more information,...

The J143 is available in 2 configurations:

J143-12:

– power in: 12V to 48V
– PoE PSE requires 38360 PoE boost add-on module

Changes from J140 to J143:

– J143: 2x USB 3.0 with TX2 (J140: 2x USB 2.0 with TX2)
– J143: M.2 NVME x2 (J140: M.2 NVME x4)
– J143: up to 48V (J140: up to 12V)
– J143: PoE PsE

This new JN30B carrier board turns the Jetson Nano compute module into a superminicomputer and high-performance storage (M.2 NVME PCIe x4).

This is revision 9.2 of the board, which has PoE PSE.

This carrier board supports only the Jetson Nano production version!
It is not compatible with TX2 NX and Orin Nano.

For a complete setup, you will also need:
– Cable kit
– Jetson Nano compute module
– Cooling Kit for the...

Heatspreader for NVIDIA Jetson Nano

Ensure efficient thermal management and secure installation of your NVIDIA Jetson Nano compute module with our heatspreader.

Designed to facilitate mounting the Nano into a case, this heatspreader effectively dissipates heat, enhancing the module’s performance and longevity.