The Nano/NX to TX2 adapter is an add on module for TX2 carrier boards.

With this adapter board you can plug it on a TX2 carrier board and run a Jetson Nano or Xavier NX on it.

The X400 (38441) is lightly larger as AGX Xavier compute module (90mm x 100mm).

Components are just on the top side.

SD Card reader and buttons are option on the bottom side.

Features:

• 12V Power input on PicoBlade connector
• 1x HDMI out, 2x micro USB 3.0, 2x GbE on PicoBlade connectors, 1x M.2 Key M NVME PCIe x4
• USB 2.0, CAN0, FAN, UART3 and I2S/I2C are located arround the board on PicoBlade connectors

The JNX33-PD is a compact carrier board for the Jetson Xavier NX (and Nano). It supports the MAXN mode of the Xavier NX and adds CAN and PCIe x1 (compared to the JN30).

A special feature is the PoE PD function, meaning that the JNX33-PD can be powered by power over ethernet.

The JNX33-PD is also available as low cost version (JNX33-LC-PD). The JNX33-PD version adds powering by PoE from a network switch (PoE-PD: 802.3at) and...

Jetson AGX Xavier carrier

• 2 x GbE
• 2 x USB 3.0
• 1 x USB 2.0
• 1 x HDMI out
• M.2 NVME PCIe x4
• optional: up to 2x LM823 Wifi modules
• UFS/SD card
• UART
• I2S/I2C
• Extension port for PCIe x4/x1/USB/UART/GPIOs
• Extension port for CSI-2 (for up to 8 cameras)
• Safety MCU for AGX Xavier Industrial (please see manual for details)
• wire kit

Cooling Kit for NVIDIA Jetson Xavier NX

Prevent potential overheating and ensure optimal performance of your Jetson Xavier NX module with our standard or high temperature copper cooling kit.

Securely mount the heatsink onto your module for superior cooling and thermal management.

If there is no stock, lead times may vary. For more information, please contact our sales team.

black aluminum heatsink and fan for the Jetson Xavier NX.
P/N: 095-0073-000

Please note that the FAN cable is very short. To connect it to our carrier board you will need an extension cable.

If there is no stock, lead times may vary. For more information, please contact our sales team.

Mounting Kit

Ensure a secure installation of your heatsink on the NVIDIA Jetson Xavier NX with our specialized mounting kit.

Kit Includes:

• Leaf Spring
• 4 Screws

For orders exceeding 500pcs. please contact our sales team.

The JNX30 (38401-3) is a compact carrier board for the Jetson Xavier NX (and Nano). It supports the MAXN mode of the Xavier NX and adds CAN and PCIe x1 (compared to the JN30).

The JNX30 is available as low cost version (JNX30-LC). The JNX30-LC-PD version adds powering by PoE from a network switch (PoE-PD: 802.3at) and a micro SD card. The full version of the JNX30 is available in 2 flavours: PoE-PD (powered device) to be...