The D20 is a high performance flight controller module designed for advanced UAV and robotic applications. It combines our FMU and sensor board in a compact, lightweight aluminum enclosure measuring just 39.2 × 32.0 × 15.2 mm, with a total weight of only 20.9 g.

This module is designed around the Pixhawk FMUv6X-RT standard ensuring, that all carrier boards with the PAB (Pixhawk Autopilot Bus Standard) are compatible....

The JNX120X is our smallest Jetson carrier board with an integrated PAB (Pixhawk Auto Pilot Bus) slot. With only 121mm x 50mm.

The JNX120X is a modern drone carrier board which is CAN centric and targeted for small to large drones.

• super mode support for Orin Nano and NX
• M.2 key M 2230 NVME SSD
• M.2 key E 2230 wifi (USB 2.0 and PCIe x1)
• M.2 key B (LTE and 5G)
• I2C
• CAN (optional internal termination)
• MCU (optional watchdog)
• USB...

The JNX120 carrier board is available in two variants: The JNX120S is our smallest Jetson carrier board to date. With only 24.7mm x 75mm (PCB weight (w/o compute module, M.2 cards): approx. 14 grams) its size is less than halve the size of a NVIDIA Jetson module and includes the following features:

• super mode support for Orin Nano and NX
• M.2 key M NVME SSD
• M.2 2230 key E wifi (USB 2.0 and PCIe x1)
• I2C
• CAN (optional internal termination)...

This carrier board is designed to be a drone platform powered by the NVIDIA Jetson Orin Nano or NX, offering a robust foundation for onboard AI processing and autonomy.

The JNX110 carrier board, specifically designed to interface seamlessly with both the Jetson module and the Pixhawk flight controller (Pixhawk Autopilot Bus standard connector) allows for easy integration for a compact, high-performance architecture...

Dual 10G Ethernet

The X232 is a high performance and extendable carrier board for the NVIDIA Jetson AGX Orin.

This board features the new RTL8127 chip, offering a compact 10G solution with high performance and low power requirements.

There is also the opportunity to add a flexible extension board. An example is the M280, which features 4 M.2 Key M slots (4x PCIe x4).

Connection of multiple Jetson Orin systems via PCIe...

The X231 is a very high performance and extendable carrier board for the AGX Orin.

When compared to the X230 it adds a unique extension connector with two PCIe x8 busses. This opens the opportunity to add a high performance extension board.

An example is the M280, which features four M.2 Key M slots (4x PCIe x4) and four OCulink connectors (4x PCIe x4). We are evaluating the connection of multiple AGX Orin via PCIe x8. 5GbE...

Size: 18mm x 16mm
2x 2.2mm mounting holes
Power supply: 3.3V or 5V
2 outputs
2 inputs
Usage: UART or GPIO level shifter

Ideal for JNX30, JNX30M, JNX42, etc:
– UART0 port (J25)
– I2S port (J26) – please check pin direction
– etc

Please note that some descriptions of pinouts on the bottom side are wrong. The correct pinouts are as follows (you can also use picture 3 as guidance):

UART 3.3V:

• GND
• CTSin...

This cable kit includes:

• 2x A1251-TP2 both side red 150mm long (42521)
• 2x A1251-TP2 both side black 150mm long (42520)
• 2x A1251-TP2 both side orange 150mm long (42522)
• 2x A1251-TP2 both side green 150mm long (42523)
• 4x A1251-H04 PicoBlade Stecker 4 polig (42402)