The JNX120X is our smallest Jetson carrier board with an integrated PAB (Pixhawk Auto Pilot Bus) slot. With only 121mm x 50mm.

The JNX120X is a modern drone carrier board which is CAN centric and targeted for small to large drones.

• super mode support for Orin Nano and NX
• M.2 key M 2230 NVME SSD
• M.2 key E 2230 wifi (USB 2.0 and PCIe x1)
• M.2 key B (LTE and 5G)
• I2C
• CAN (optional internal termination)
• MCU (optional watchdog)
• USB...

    The JNX120 carrier board is available in two variants: The JNX120S is our smallest Jetson carrier board to date. With only 24.7mm x 75mm (PCB weight (w/o compute module, M.2 cards): approx. 14 grams) its size is less than halve the size of a NVIDIA Jetson module and includes the following features:

• super mode support for Orin Nano and NX
• M.2 key M NVME SSD
• M.2 2230 key E wifi (USB 2.0 and PCIe x1)
• I2C
• CAN (optional internal...

This carrier board is designed to be a drone platform powered by the NVIDIA Jetson Orin Nano or NX, offering a robust foundation for onboard AI processing and autonomy.

The JNX110 carrier board, specifically designed to interface seamlessly with both the Jetson module and the Pixhawk flight controller (Pixhawk Autopilot Bus standard connector) allows for easy integration for a compact, high-performance architecture...

10 GigaBit Ethernet – The future of high-speed networking

This tiny M.2 key E (2230/2242) add-on card is designed to seamlessly elevate any computer with a M.2 with 10G Ethernet. 

• Supports NVIDIA Jetson Orin NX/AGX and more
• Based on Realtek RTL8127
• Low power: < 1.5W
• M.2 key E card (2230/2242)
• PicoBlade 10 pin connector (for RJ45 or M12 Xcode)
• PoE support optional (4 pin JST-GH)
• Size: 22mm x 30/42mm
• SW drivers:...

5 GigaBit Ethernet – The future of high-speed networking

This tiny M.2 key E (2230/2242) add-on card is designed to seamlessly elevate your cameras performance and to enable the use of 5 GigE Vision cameras.

• Supports NVIDIA Jetson Orin NX/AGX and more
• Based on Realtek RTL8126
• Low power: < 1.5W
• M.2 key E card (2230/2242)
• PicoBlade 10 pin connector (for RJ45 or M12 Xcode)
• PoE support optional (4 pin JST-GH)
• Size: 22mm x...

Expansion module for our carrier boards

This addon module lets you expand the use of our carrier boards and enables you to connect to audio devices.

• USB audio device plus audio amplifier
• Compatible with JNX8X
• Line out (3.5mm stereo jack)
• Speaker out (4pin Harting connector)
• 2x 15W audio amplifier
• M.2 key E slot (2230/2242) USB + PCIe
• Optional Raspberry Pi Pico
• Model number: 38638-3
• Used in our AI driven Auvideus 1000...

Expansion for the X231 carrier boards

This addon module lets you expand the use of our X231 carrier boards for the AGX Orin by enabling you to use the following:

• 3x M.2 Key E (USB2.0) 2242/2230 (top side), 2242 (bottom side)
  • GNSS (GPS), GNSS (GPS) RTK, USB based Wifi
  • PCIe based Wifi cards are not supported
• 1x M.2 Key B (USB2.0) 3042 (bottom side) with dual nano SIM (eSIM optional)
  • LTE
• 4x 4-lane CSI-2 ports (22pin FPC)
• 2x PCIe...

Expansion for the X23x carrier boards

This addon module lets you expand the use of our X23x carrier boards for the AGX Orin by enabling you to use the following:

• 3x M.2 Key E (USB2.0) 2242/2230 (top side), 2242 (bottom side)
  • GNSS (GPS), GNSS (GPS) RTK, USB based Wifi
  • PCIe based Wifi cards are not supported
• 1x M.2 Key B (USB2.0) 3042 (bottom side) with dual nano SIM (eSIM optional)
  • LTE
• 4x 4-lane CSI-2 ports (22pin FPC)
• 2x OCuLink...