The JNX120X is our smallest Jetson carrier board with an integrated PAB (Pixhawk Auto Pilot Bus) slot. With only 121mm x 50mm.

The JNX120X is a modern drone carrier board which is CAN centric and targeted for small to large drones.

• super mode support for Orin Nano and NX
• M.2 key M 2230 NVME SSD
• M.2 key E 2230 wifi (USB 2.0 and PCIe x1)
• M.2 key B (LTE and 5G)
• I2C
• CAN (optional internal termination)
• MCU (optional watchdog)
• USB...

This board is based around the capabilities of the PAB (Pixhawk Autopilot Bus Standard) implemented in our JNX110 carrier board, to enable easy and space efficient installation of flight controllers in different use cases.

The power in supports reverse voltage protection and an inrush current limitation to minimize mishaps during setup.

All standard PX4 autopilot functions are supported,...

The JNX120 carrier board is available in two variants: The JNX120S is our smallest Jetson carrier board to date. With only 24.7mm x 75mm (PCB weight (w/o compute module, M.2 cards): approx. 14 grams) its size is less than halve the size of a NVIDIA Jetson module and includes the following features:

• super mode support for Orin Nano and NX
• M.2 key M NVME SSD
• M.2 2230 key E wifi (USB 2.0 and PCIe x1)
• I2C
• CAN (optional internal termination)...

This carrier board is designed to be a drone platform powered by the NVIDIA Jetson Orin Nano or NX, offering a robust foundation for onboard AI processing and autonomy.

The JNX110 carrier board, specifically designed to interface seamlessly with both the Jetson module and the Pixhawk flight controller (Pixhawk Autopilot Bus standard connector) allows for easy integration for a compact, high-performance architecture...

Introducing the JNX90, our versatile and lightweight carrier board, designed for compatibility with NVIDIA Jetson TX2 NX, Xavier NX, Orin Nano, and Orin NX modules.

Engineered for cutting-edge drones and robotic applications, the JNX90 combines performance and efficiency in a compact form factor.

• Model: 38661-2
• 2x CSI-2 (4 lanes each) micro coax connector (for FCB cam and others)
• Exclusively JST GH plugs (vertical)...

The JNX42 is a compact carrier board for the Jetson Orin Nano, Orin NX. It is based on the JNX40 and has CAN and PCIe x1.
It has also 2x CSI-2 with 4 lanes each.
– 1x USB 3.0 type A with Jetson Xavier NX
– 2x USB 2.0 type A
– 1x micro USB for flashing
– 1x USB 2.0 for the M.2 key B LTE slot
If you use the compute module NVIDIA Jetson Orin NX than you have 3x USB 3.0 type A.

A special feature is the PoE PD function. This...