The Nano/NX to TX2 adapter is an add on module for TX2 carrier boards. With this adapter board you can plug it on a TX2 carrier board and run a Jetson Nano or Xavier NX on it.

First samples are available on request

In stock

NVIDIA Jetson TX2I Industrial, Model: 900-83489-0000-000

NVIDIA® Jetson™ TX2i module’s rugged design, small form factor, and reduced power envelope make it ideal for high-performance edge computing devices such as industrial robots, machine vision cameras, and portable medical equipment.

Please note: this compute module is only available in combination with an Auvidea carrier board. Please contact...

with 4 pin PicoBlade connector.

The J143 is available in 2 configurations:

J143-48:

– no PoE PSE: power in: 12V to 48V
– PoE PSE: power in must be 48V
– power in directly powers PoE PSE

The J143 is available in 2 configurations:

J143-12:

– power in: 12V to 48V
– PoE PSE requires 38360 PoE boost add-on module

Changes from J140 to J143:

– J143: 2x USB 3.0 with TX2 (J140: 2x USB 2.0 with TX2)
– J143: M.2 NVME x2 (J140: M.2 NVME x4)
– J143: up to 48V (J140: up to 12V)
– J143: PoE PsE

In stock

900-83489-0080-000 NVIDIA Jetson TX2 4GB CVM Compute Module Note:

• the CVM is shipped blank with no firmware installed. Please install the firmware yourself or check out our flashing service

Please note: this compute module is only available in combination with an Auvidea carrier board. Please contact us for more information: [email protected]

Jetson TX1/TX2 carrier (38198-9):
– 1 x GbE
– TX1: 2x USB 3.0, TX2: 1x USB 3.0 and 1x USB 2.0
– 1 x CSI-2 (4n lanes)
– 2 x UART
– SPI/GPIO
– MCU (for safe power up and down)
– MPU-9250 (IMU)

New features of the rev 9 version of the J120A:
– auto flash (just plug in OTG USB cable and power up the TX1/2 – no need to press the recovery button)
– UART0 bypass (console port...