Jetson TX1/TX2 carrier (38198-9):
– 1 x GbE
– TX1: 2x USB 3.0, TX2: 1x USB 3.0 and 1x USB 2.0
– 1 x CSI-2 (4n lanes)
– 2 x UART
– SPI/GPIO
– MCU (for safe power up and down)
– MPU-9250 (IMU)

New features of the rev 9 version of the J120A:
– auto flash (just plug in OTG USB cable and power up the TX1/2 – no need to press the recovery button)
– UART0 bypass (console port...

Jetson TX2 carrier

• 1 x GbE
• 2 x USB 3.0
• 1 x USB 2.0
• 1 x CSI-2 for B102
• 2 x UART
• M.2 NVME PCIe x2
• SPI/GPIO
• MCU and MPU-9250 IMU

This cable kit includes:

• 4x Jetson M3 7mm (2x internal)
• M3 Sechskant 7mm, 2x internal (41051)
• 5x A1251-H04 PicoBlade Stecker 4 polig (42402)
• 2x A1251-H06 PicoBlade Stecker 6 polig (42404)
• 2x A2541-H01-100-A1251-TP yellow 100mm, with a female header pin (42586)
• 3x A2541-H01-100-A1251-TP red 100mm, with a female header pin (42581)
• 5x A2541-H01-100-A1251-TP black 100mm, with a female header pin (42580)
• 2x A2541-H01-100-A1251-TP...

Changes from J140 to J142:

– J142: 2x USB 3.0 with TX2 (J140: 2x USB 2.0 with TX2)

– J142: M.2 NVME x2 (J140: M.2 NVME x4)

– J142: up to 48V (J140: up to 12V)

NVIDIA Jetson TX2 CVM compute module (without heatsink and fan). Please note that the CVM is shipped blank with no firmware installed. Please install the firmware yourself. A flashing service will be offered soon.

Please note: this compute module is only available in combination with an Auvidea carrier board. For more information, please contact our sales team.

Jetson TX1/TX2 carrier with 2x GbE, 3x 4 lane CSI-2 and 2S Lipo battery backup (38215-3).

Jetson TX1/TX2 carrier (1 x GbE, 5 x USB 3.0, 1x USB 2.0, IMU, no HDMI in) (38205-5)