Description
Features:
- High FPS for faster, accurate object detection per frame
- Optimal AI performance at low power and cost
- AI powered enhancements for noise reduction, digital zoom, stabilization, and correction
- Premium 4k60 quality with HDR and noise reduction
- Leading DSP vision processing and video encoding (H.264/H.265)
- ISP (Image Signal Processor):
– advanced noise reduction (2DNR, 3DNR, Chroma NR)
– digital zoom, flip, rotate
– digital image stabilization
– lens distortion correction - Ideal as preprocessor for NVIDIA Jetson systems
Technical Specifications
- Hailo-15H with an AI performance of 20 TOPS
- Application processor: Quad-Core ARM A53 with up to 1.3 GHz (12kDMIPs)
- Memory: 4GB (LPDDR4 32bit @ 4266 MT/s)
- QSPI: 32MB boot loader (upgradable with UART debug console)
- Flash memory: Micro SD 32GB (up to 1TB possible) – please use Sandisk Ultra cards
- Board spacing: 3.0mm, 4.0mm (heat spreader)
- Board size: 25.5mm x 25.5mm (1 inch by 1 inch)
- Designed and manufactured in Germany (inhouse SMT line)
Custom versions with different Hailo-15 (L, M or H) variations and 2, 4 or 8GB LPDDR4 memory are available on request.
Please note: the Hailo-15 is designed for camera integration with uncompressed video feeds (MIPI CSI-2, FPD-Link III, GMSL2, A-PHY, USB3-Vision or GigE-Vision).
Therefore the Hailo-15H does not integrate video encoder and should not be used with compressed video streams from USB cameras or network IP cameras.
The CA20 adapter for Leopard cameras with IPEX connector is in development.
If you want customized support (software and hardware), please wait for our Hailo 15H eval board, which is planned to be released soon.
HC11 network interface adapter:
This alternative network adapter (w/o PoE) supports the following interfaces:
- Gbit Ethernet (same as HC10) (10 pin picoblade)
- DC input (12V 1A) (4 pin picoblade)
- USB 2.0 (4 pin JST-GH) (not supported today)
- I/O port with UART debug console and I2C (6 pin JST-GH) (both 3.3V)
The HC11 will be released soon.
Upcoming addons:
- C102: IMX678 camera sensor (8MP rolling shutter Starvis 2)
- CA20: Leopard camera adapter (IPEX)
- HM11 eMMC based memory board
- HC11: Ethernet (w/o PoE), debug UART, I2C, DC power
all 4 addons for Hailo-15H Compute Stack will be available March 2025
Future addons:
- C101: IMX662 camera sensor (2MP rolling shutter Starvis 2)
- C201: IMX900 camera sensor (3.2MP global shutter Pregius)
Protoypes of these sensors are already available and they are supported by the NVIDIA Jetson. Driver development for the Hailo-15 is planned.