1. Home
  2. /
  3. Products
  4. /
  5. Cameras
  6. /
  7. CSI-2 Adapters
  8. /
  9. Framos camera adapter

Framos camera adapter

Tiny adapter to interface Framos CSI-2 camera modules with Auvidea carrier boards (with voltage and interface conversion)

Download
product brief Framos Driver Auvidea device tree 3D model (STEP)

12 in stock (can be backordered)

 49,90

Plus 19% VAT
Delivery Time: ca. 48 hours
SKU: 70423 Categories: ,
Caption

Description

This tiny adapter allows to connect the Framos CSI-2 camera modules to any Auvidea carrier board with CSI-2 connector. It boosts the supply voltage to the camera module and converts the I2C bus voltage, to connect the 38512 to the Auvidea carrier board. A 1:N 22 pin 0.5mm FFC cable is required.

Specification:
Model: 38512
Power in: 3.3V
I2C level in: 3.3V
Power out: 3.8V
I2C level out: 1.8V
CSI-2 lanes: 4
CSI-2 cabling: 1:N 22 pin 0.5mm pitch (contacts on same side – contacts down)
Size: 10mmx17mm
Stacking height: 2.5mm
Connector: DF40C (60 pin: DF40HC(2.5)-60DS-0.4V)

Tested with Jetson TX2 NX (Jetpack 4.6.1):
imx335: FSM-IMX335M-000-v1a (plus FSA-FT3/A-v1a) with 2 CSI-2 lanes
imx412: FSM-IMX412C-01S-v1b (plus FSA-FT1/A-v1a) with 2 CSI-2 lanes
imx415: FSM-IMX415C-000-v1a (plus FSA-FT11/A-v1a) with 2 CSI-2 lanes

Software installation:
1. first install Jetpack 4.6.1
2. install Framos driver (download)
3. flash Auvidea device tree (download)

The 38512 adapter is designed for prototyping applications to easily connect any Framos CSI-2 camera to any Auvidea carrier board. For more cost effective production rollouts a different solution is proposed. Most Auvidea carrier boards can be custom configured for 5V supply on the CSI-2 ports and 1.8V I2C level. With this configuration a simple passive adapter can be used. A development of such an adapter is planned.