Raspberry Pi Camera v2.1
SKU: 43200Raspberry Pi Camera v2.1 (8 MP) – optional cable adapter (38237) for Jetson TX1 carrier boards with 22 pin CSI-2 connector
Available on backorder
Raspberry Pi camera module v2.1
| Specification | Raspberry Pi camera |
| Model | Pi cam v2.1 (8 MP) with Sony IMX219 sensor |
| CSI-2 lanes | 2 |
| Resolution | native: 3280 x 2464 (8,081,920 pixels) 1640 x 1232 (2×2 binning: this is the default mode for the 6 camera setup with the J106) for full viewing angle and the usage of all pixels (best light sensitivity and lowest noise level) |
| Interfaces | 15 pin FPC connector to host system (e.g. Raspberry Pi, J90, J100, J106, J120, and J140) pin out compatible to Raspberry Pi 3 (15 pin cam connector with 1mm pitch) optional 4 lane adapter: 38237 (required for carrier boards with 22 pin CSI-2 connector) |
| Power supply | 3.3V via FFC cable connection – powered by Jetson carrier board |
| Size | ?mm x ?mm 4 mount holes: ? |
| FFC cable | default length: 150mm (15pin, 1mm pitch, contacts on opposite sides) please use the 38237 adapter and 22 pin FFC cables to extend the cable |
| Driver | Auvidea firmware packages include driver for this IMX219 camera (TX1 only at this time – TX2 is planned) |
Order code: 43200