Your cart is currently empty!
This add-on module is a 4 port GbE switch adapter board and will be connected via PCIe X1.
It has 5 RGB LEDs and can be set up as desired.
This board is available with RJ45 sockets (P140-R) or Xcode sockets (P140-M)
At full power, the Power Inductor should be cooled.
P140 is compatible to the following carrier boards:
JNX30
JNX30M
JNX42
X221D
X230D
If the carrier board has no PCIex1 interface, P140 can be connected to other...
Introducing the R21, an advanced industrial general-purpose
solution designed to enhance the capabilities of the Raspberry
Pi Zero. By seamlessly integrating the Pi Zero and its 40-pin GPIO
header onto the carrier board, the R21 provides a robust
foundation for expanded functionality.
Unlocking new possibilities, the R21 features a PCIe-based M.2
Key M slot, offering reliable and high-speed solid-state storage...
Features:
– USB 2.0 to flash the Jetson
– Jetson debug UART console
– MCU console
– optional: limited power supply to Jetson (just for flashing only) – 350mA max.
(limited by Ethernet cable)
Size: 18mm x 79mm
Designed for: JNX45 and JNX46 (requires RJ45 to IX Ethernet cable – 1.5m max)
Please order RJ45 to IX Ethernet cable for connecting Service Port Adapter...
Add-on module for Auvidea carrier boards to add 2 M.2 slots for LTE and Wifi cards.
Download | |||
3D model (STEP) |
U120 4x USB 2.0 type A modul (38372)
3d model (STEP) |
Size: 18mm x 16mm
2x 2.2mm mounting holes
Power supply: 3.3V or 5V
2 outputs
2 inputs
Usage: UART or GPIO level shifter
Ideal for JNX30, JNX30M, JNX42, etc:
– UART0 port (J25)
– I2S port (J26) – please check pin direction
– etc
If there is no stock, lead times may vary. Please ask the sales team: [email protected].
Download | |||
3D model (STEP) |
Optional 20-pin header to access the GPIOs on the backside of the J90.