If there is no stock, lead times may vary. Please ask the sales team: [email protected].

PCIe x1 extension module for JNX42 or JNX45 carrier board.

P12 isolated Power over Ethernet+ PD

This add-on module is a 4 port GbE switch adapter board and will be connected via PCIe X1.
It has 5 RGB LEDs and can be set up as desired.

This board is available with RJ45 sockets (P140-R) or Xcode sockets (P140-M)

At full power, the Power Inductor should be cooled.

P140 is compatible to the following carrier boards:

JNX30
JNX30M
JNX42
X221D
X230D

If the carrier board has no PCIex1 interface, P140 can be connected to other...

Features:
– USB 2.0 to flash the Jetson
– Jetson debug UART console
– MCU console
– optional: limited power supply to Jetson (just for flashing only) – 350mA max.
   (limited by Ethernet cable)

Size: 18mm x 79mm
Designed for: JNX45 and JNX46 (requires RJ45 to IX Ethernet cable – 1.5m max)

Please order RJ45 to IX Ethernet cable for connecting Service Port Adapter...

Size: 18mm x 16mm
2x 2.2mm mounting holes
Power supply: 3.3V or 5V
2 outputs
2 inputs
Usage: UART or GPIO level shifter

Ideal for JNX30, JNX30M, JNX42, etc:
– UART0 port (J25)
– I2S port (J26) – please check pin direction
– etc

If there is no stock, lead times may vary. Please ask the sales team: [email protected].